how to fix P0700 code in Honda Accord 8th Generation (2008-2012)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

4 min read

607 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control malfunction in Honda Accord 2008-2012. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine and transmission to cool before performing any maintenance to avoid burns.

Symptoms

•Check engine light illuminated
•Erratic shifting or harsh transmission behavior
•Transmission slipping or failure to engage
•Delayed engagement when shifting from park to drive
•Poor fuel economy
•Transmission overheating

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve any additional codes related to the transmission.
2
Inspect the transmission fluid level and condition; check for discoloration or burning smell.
3
Examine wiring and connectors to the TCM for damage or corrosion.
4
Verify the operation of the transmission range sensor and ensure it is functioning correctly.
5
Check for any mechanical issues in the transmission by performing a visual inspection of the transmission assembly.
6
Test the TCM using a multimeter to ensure it is receiving and sending the correct signals.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Wire stripper
•Transmission fluid pump
•Torque wrench

Parts Required

•Honda ATF Z1 or DW-1 transmission fluid
•Transmission filter (if applicable)
•TCM (if replacement is necessary)
•Gasket for transmission pan

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve any additional codes related to the transmission.
2
Inspect the transmission fluid level and condition; check for discoloration or burning smell.
3
Examine wiring and connectors to the TCM for damage or corrosion.
4
Verify the operation of the transmission range sensor and ensure it is functioning correctly.
5
Check for any mechanical issues in the transmission by performing a visual inspection of the transmission assembly.
6
Test the TCM using a multimeter to ensure it is receiving and sending the correct signals.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a flat surface and securely lifted with jack stands.
Disconnect the negative battery terminal to avoid electrical shock.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, fluid catch pan, funnel.
Remove the transmission fluid dipstick and check fluid level.
If low, add the recommended transmission fluid (Honda ATF Z1 or DW-1) as needed.
If fluid is burnt or contaminated, drain the transmission fluid:
- Place a catch pan under the transmission pan.
- Remove the transmission pan bolts using a socket set.
- Carefully lower the pan and drain the fluid.
- Install a new transmission filter if applicable.
- Reinstall the transmission pan with a new gasket and torque bolts to manufacturer specifications.

3. Inspect and Repair Wiring/Connectors

Tools Required: Multimeter, wire stripper, electrical tape.
Visually inspect all wiring harnesses and connectors leading to the TCM.
Use a multimeter to check for continuity and proper voltage.
Repair or replace any damaged wires or connectors as necessary.

4. Test and Replace TCM (if needed)

Tools Required: OBD-II scanner, basic hand tools for removal.
If diagnostics show a faulty TCM, disconnect the battery again.
Locate the TCM (usually found under the dashboard or near the transmission).
Remove the mounting bolts and disconnect the wiring harness.
Install the new TCM, reconnect the harness, and secure it with mounting bolts.
Reconnect the negative battery terminal.