how to fix my Honda Accord 9th Generation (2013-2017) suspension noise when driving

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

489 words

Problem Statement

Learn how to diagnose and fix suspension noise in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure vehicle is securely lifted before working underneath.
•Wear safety goggles and gloves to protect against debris and sharp edges.

Symptoms

•Clunking or banging noise over bumps
•Creaking or squeaking noises during turns
•Poor ride quality or handling
•Uneven tire wear
•Steering wheel vibration

Diagnostic Steps

1
Inspect the suspension components visually for signs of wear or damage.
2
Check for loose bolts or hardware on struts and control arms.
3
Perform a bounce test by pushing down on the front and rear of the vehicle to check for excessive rebound.
4
Examine the bushings and mounts for cracks or deterioration.
5
Check the strut assembly for leaks or damage.
6
Test drive the vehicle over various road conditions to replicate the noise.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Socket set
•Torque wrench
•Bushing press tool
•Wrench set

Parts Required

•Replacement struts (if damaged)
•New bushings (if worn)
•Replacement bolts/nuts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components visually for signs of wear or damage.
2
Check for loose bolts or hardware on struts and control arms.
3
Perform a bounce test by pushing down on the front and rear of the vehicle to check for excessive rebound.
4
Examine the bushings and mounts for cracks or deterioration.
5
Check the strut assembly for leaks or damage.
6
Test drive the vehicle over various road conditions to replicate the noise.

Solution

1. Preparation

Gather tools and parts required.
Park the vehicle on a flat surface, engage the parking brake, and use wheel chocks.
Disconnect the battery to prevent any electrical issues while working.

2. Inspect and Replace Worn Components

Lift the Vehicle:
- Use a hydraulic jack to lift the vehicle and secure it with jack stands.
- Remove the front or rear wheel depending on which suspension side is making noise.
Examine the Strut Assembly:
- Inspect the strut for oil leaks or physical damage.
- If damaged, remove the strut assembly by loosening the top nuts in the engine bay and the lower mounting bolts.
- Replace with a new strut if necessary.
Check the Bushings:
- Inspect control arm and sway bar bushings for wear.
- If cracked or worn, remove the control arm and replace bushings.
- Use a bushing press tool for easier removal and installation.
Tighten Loose Bolts:
- Ensure all bolts and nuts are tightened to the manufacturer's specifications using a torque wrench.
- Consult the service manual for specific torque values.

3. Reassemble and Lower the Vehicle

Reattach the wheel and lower the vehicle.
Remove jack stands and lower the jack fully.