how to fix my Honda Accord 9th Generation (2013-2017) if the car shakes while braking

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

497 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to fix shaking while braking in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic steps and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the negative battery terminal when working on braking systems.
•Allow the vehicle to cool before working on brakes to prevent burns.

Symptoms

•Steering wheel shakes during braking
•Vibration felt through the brake pedal
•Increased stopping distance
•Uneven wear on brake pads
•Possible noise from brake components (squeaking or grinding)

Diagnostic Steps

1
Inspect brake pads and rotors for uneven wear or damage.
2
Check for warping of the brake rotors using a dial indicator.
3
Examine tire condition and balance.
4
Review suspension components for wear or damage (e.g., control arms, bushings).
5
Verify wheel alignment and tire pressure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•Dial indicator
•Brake cleaner
•Safety glasses and gloves

Parts Required

•Brake pads
•Brake rotors (if warped)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Use wheel chocks to prevent movement.

Tools Required:

Jack and jack stands
Lug wrench
Torque wrench
Dial indicator
Brake cleaner
Safety glasses and gloves

2. Remove Wheel

Loosen the lug nuts slightly while the vehicle is on the ground.
Lift the vehicle with a jack and securely place jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Components

Brake Pads:
- Inspect the thickness and condition of the brake pads. Replace if worn below manufacturer specifications.
Brake Rotors:
- Use a dial indicator to check for warping. If the rotor is warped beyond specifications, it should be replaced or machined.
- Clean the rotor surface with brake cleaner before installation.
Suspension Check:
- Inspect control arms and bushings for wear. Replace any worn components.

4. Reassemble

Reinstall the brake pads and rotors (if replaced).
Place the wheel back onto the hub.
Hand-tighten the lug nuts.
Lower the vehicle from the jack stands and torque the lug nuts to the manufacturer’s specifications.

5. Test Drive

Conduct a test drive to ensure the issue is resolved.
Monitor for any vibrations or abnormal noises during braking.