how to fix clicking noise in steering column of Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

502 words

Problem Statement

Learn how to diagnose and fix clicking noise in the steering column of Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts or shocks.
•Ensure the vehicle is securely supported on jack stands when working underneath.

Symptoms

•Clicking noise when turning the steering wheel
•Noise present at specific angles of steering
•Possible vibration felt through the steering wheel
•Increased resistance or stiffness in steering movement
•Intermittent or constant noise regardless of vehicle speed

Diagnostic Steps

1
Inspect the steering column for any visible signs of wear or damage.
2
Check the steering wheel and column for loose components or fasteners.
3
Examine the steering shaft and joints for proper lubrication and wear.
4
Test the steering rack for signs of play or damage.
5
Scan for any error codes related to the steering system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Steering wheel puller
•Lubricant or grease

Parts Required

•Replacement tie rod ends

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the steering column for any visible signs of wear or damage.
2
Check the steering wheel and column for loose components or fasteners.
3
Examine the steering shaft and joints for proper lubrication and wear.
4
Test the steering rack for signs of play or damage.
5
Scan for any error codes related to the steering system using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to avoid electrical issues.
Ensure the vehicle is parked on a level surface and secured with wheel chocks.

2. Inspect and Tighten Components

Sub-steps:
- Remove any decorative covers from the steering column as needed.
- Using a socket set, check and tighten all bolts and screws on the steering column and steering wheel.
- Inspect the upper and lower steering column joints for any looseness and tighten as necessary.

3. Lubricate Steering Components

Sub-steps:
- Remove the steering wheel if necessary (use a steering wheel puller if needed).
- Apply a silicone-based lubricant or grease to the steering shaft and universal joints.
- Reassemble the steering wheel, ensuring it is properly aligned and torqued to manufacturer specifications.

4. Inspect Steering Rack

Sub-steps:
- Raise the vehicle and secure it with jack stands.
- Visually inspect the steering rack for any leaks or damage.
- Check the tie rod ends for excessive play, replacing them if necessary.

5. Reassemble and Test

Sub-steps:
- Reattach any covers removed during the inspection.
- Reconnect the negative battery terminal.
- Start the vehicle and test the steering for any remaining noise while turning the wheel.