how to fix a stuck throttle in my Honda Accord 9th Generation (2013-2017)?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

451 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a stuck throttle in your Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on the throttle body to avoid burns.

Symptoms

•Engine RPM remains elevated even with no accelerator input
•Check engine light illuminated
•Unresponsive accelerator pedal
•Engine stalling when coming to a stop
•Increased fuel consumption

Diagnostic Steps

1
Inspect the throttle body for physical obstructions or carbon buildup.
2
Check the throttle cable for fraying or binding.
3
Scan for error codes using an OBD-II scanner to identify related issues.
4
Examine the accelerator pedal assembly for proper function.
5
Test the throttle position sensor for accurate readings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Throttle body cleaner
•Soft cloth
•Pliers
•Socket set
•Multimeter

Parts Required

•Throttle cable (if damaged)
•Throttle position sensor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the throttle body for physical obstructions or carbon buildup.
2
Check the throttle cable for fraying or binding.
3
Scan for error codes using an OBD-II scanner to identify related issues.
4
Examine the accelerator pedal assembly for proper function.
5
Test the throttle position sensor for accurate readings.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Clean Throttle Body

Tools Required: Throttle body cleaner, soft cloth
Remove the air intake duct leading to the throttle body.
Use throttle body cleaner and a soft cloth to clean the inside of the throttle body, removing any carbon buildup.
Ensure the throttle plate moves freely and is not obstructed.

3. Check Throttle Cable

Tools Required: Pliers, socket set
Inspect the throttle cable from the accelerator pedal to the throttle body.
If the cable is frayed or binding, disconnect it at both ends and replace it with a new throttle cable.

4. Test Throttle Position Sensor (TPS)

Tools Required: Multimeter
Locate the TPS on the throttle body.
Disconnect the electrical connector and use a multimeter to test for proper voltage readings while moving the throttle plate.
If readings are out of specification, replace the TPS.

5. Reassemble and Reconnect

Reattach the air intake duct securely.
Reconnect the negative battery terminal.
Start the engine and allow it to idle.