how to diagnose transmission jerking when shifting in my Honda Accord 9th Generation (2013-2017)?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

638 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostics, and repairs.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on the transmission.

Symptoms

•Jerking or harsh shifting between gears
•Delayed engagement when accelerating from a stop
•Unusual noises during shifting (clunking or grinding sounds)
•Fluctuating RPMs while shifting
•Check engine light may be illuminated
•Transmission fluid may appear burnt or discolored

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to check for any stored error codes.
2
Inspect the transmission fluid level and condition; ensure it is at the proper level and not burnt or contaminated.
3
Check for any visible leaks around the transmission and associated components.
4
Examine the transmission mounts for wear or damage that could lead to jerking during shifts.
5
Test the vehicle's throttle position sensor (TPS) using a multimeter to ensure it is functioning correctly.
6
Perform a road test to replicate the jerking and note the conditions under which it occurs (speed, load, etc.).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Wrench set
•Multimeter
•Torque wrench
•Fluid pump

Parts Required

•Transmission fluid
•Transmission filter
•Gasket
•Throttle position sensor (if necessary)
•Transmission mounts (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to check for any stored error codes.
2
Inspect the transmission fluid level and condition; ensure it is at the proper level and not burnt or contaminated.
3
Check for any visible leaks around the transmission and associated components.
4
Examine the transmission mounts for wear or damage that could lead to jerking during shifts.
5
Test the vehicle's throttle position sensor (TPS) using a multimeter to ensure it is functioning correctly.
6
Perform a road test to replicate the jerking and note the conditions under which it occurs (speed, load, etc.).

Solution

1. Preparation

Gather tools and safety equipment.
Ensure the vehicle is parked on a level surface and securely raise it using jack stands.
Disconnect the battery to prevent electrical shorts during repairs.

2. Inspect Transmission Fluid

Remove the transmission dipstick and check fluid level and color.
If the fluid is low, top it up with the manufacturer-recommended transmission fluid.
If the fluid is burnt or contaminated, proceed to the next step.

3. Change Transmission Fluid and Filter

Tools Required: Socket set, wrench set, fluid pump, transmission fluid, new filter, gasket.
Drain the old transmission fluid by removing the drain plug and allowing it to fully drain into a suitable container.
Remove the transmission pan by unscrewing the bolts and carefully separating it from the transmission case.
Replace the old filter with a new one, ensuring to align it properly.
Clean the transmission pan and replace the gasket before reinstalling it.
Refill the transmission with new fluid through the dipstick tube using a fluid pump.

4. Inspect and Replace Transmission Mounts (if necessary)

Tools Required: Socket set, torque wrench.
Identify and remove the bolts securing the transmission mounts to the frame.
Replace any worn or damaged mounts with new ones, ensuring they are properly torqued according to manufacturer specifications.

5. Test Throttle Position Sensor

Tools Required: Multimeter.
Disconnect the TPS connector and measure the resistance across the terminals.
Compare the readings to the manufacturer specifications; if readings are out of range, replace the sensor.