how do I reset the check engine light on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

417 words

Problem Statement

Learn how to reset the check engine light on your Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic steps and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Ensure the vehicle is in park or neutral with the parking brake engaged while performing repairs.

Symptoms

•Check engine light illuminated on the dashboard
•Vehicle may exhibit no noticeable performance issues
•Possible stored error codes in the vehicle’s computer

Diagnostic Steps

1
Use an OBD-II scanner to check for error codes.
2
Note any codes and potential causes before proceeding with the reset.
3
If applicable, address the underlying issue that triggered the check engine light.
4
Ensure the vehicle is turned off before starting the reset procedure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Wrench or socket set

Parts Required

•None, unless underlying issues need parts replacement.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner
Ensure the vehicle is parked on a flat surface and the ignition is off.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard, near the driver's side.
Plug in the OBD-II scanner and turn the ignition to the "ON" position without starting the engine.

3. Read and Clear Codes

Follow the scanner's instructions to read the stored error codes.
After noting the codes, select the option to clear or erase the codes from the vehicle’s computer.

4. Disconnecting the Battery (Alternative Method)

If an OBD-II scanner is not available, you can reset the check engine light by disconnecting the battery.
Tools Required: Wrench or socket set
Disconnect the negative terminal of the battery and wait for approximately 15 minutes.
Reconnect the negative terminal securely.

5. Test the System

Start the vehicle and check if the check engine light remains off.
If the light is still on, further diagnostics may be necessary.