how to reset the maintenance light on my Honda Civic 11th Generation (2022-Present)

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

340 words

Problem Statement

Learn how to reset the maintenance light on your 2022 Honda Civic 11th Generation. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and that the engine is off when performing resets to avoid accidental engagement of the vehicle.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible reminders for oil change or service due
•No change in vehicle performance

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Verify that the maintenance light is illuminated on the dashboard.
3
Ensure all doors are closed and the vehicle is in park.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver (optional)

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools, including a flathead screwdriver (optional) for pressing the odometer button.
Ensure the vehicle is parked and the ignition is off.

2. Turn on Ignition

Insert the key into the ignition or press the start button without pressing the brake pedal to turn the ignition on.

3. Access Maintenance Reset

Locate the odometer/trip button on the dashboard. This is usually found near the speedometer.
Press and hold the odometer/trip button.

4. Reset Maintenance Light

While holding the odometer/trip button, turn the ignition to the "ON" position (without starting the engine).
Continue to hold the button for about 10 seconds until the maintenance light blinks and then turns off.
Release the odometer/trip button.

5. Confirm Reset

Turn off the ignition and then turn it back on to ensure the maintenance light remains off.