how to reset the maintenance light on my Honda Civic 11th Generation (2022-Present)

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

357 words

Problem Statement

Learn how to reset the maintenance light on your 2022 Honda Civic 11th Generation. Follow our step-by-step guide for a quick and easy solution.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface before starting the reset process.

Symptoms

•Maintenance light is illuminated on the dashboard
•Reminder for oil change or other scheduled maintenance is displayed
•Vehicle performance issues may arise if maintenance is not performed

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Engine Start/Stop' button without pressing the brake pedal.
3
Wait for the dashboard lights to illuminate (about two seconds).
4
Release the 'Engine Start/Stop' button.
5
Quickly press the gas pedal three times within 10 seconds.
6
Turn the ignition off and then start the engine to verify the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required but a flashlight may be useful

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Engine Start/Stop' button without pressing the brake pedal.
3
Wait for the dashboard lights to illuminate (about two seconds).
4
Release the 'Engine Start/Stop' button.
5
Quickly press the gas pedal three times within 10 seconds.
6
Turn the ignition off and then start the engine to verify the reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools (if required, such as a flashlight for visibility).

2. Access the Maintenance Reset Procedure

Step 1: Sit in the driver's seat and close the doors.
Step 2: Insert the key fob into the ignition or prepare to use the "Engine Start/Stop" button.

3. Reset the Maintenance Light

Step 1: Press and hold the "Engine Start/Stop" button without pressing the brake pedal until the dashboard lights illuminate.
Step 2: Release the button, then press the gas pedal three times within 10 seconds.
Step 3: Turn the ignition off and then start the vehicle to confirm the maintenance light is off.