FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Accord 9th Generation (2013-2017) - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
345 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2017 Honda Accord. Step-by-step guide for a quick and easy reset after oil changes.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before starting the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Notification of upcoming maintenance displayed
  • •Reminder for oil change or service interval due

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this process.
  • Ensure the vehicle is parked on a level surface with the ignition off.
2. Reset the Maintenance Light
  1. Locate the "Select/Reset" button on the instrument panel, usually near the speedometer.
  2. With the vehicle in the "OFF" position, press and hold the "Select/Reset" button.
  3. While holding the button, turn the ignition switch to the "ON" position (do not start the engine).
  4. Keep holding the button until the maintenance light blinks and then turns off. This may take about 10 seconds.
  5. Release the "Select/Reset" button.
  6. Turn the ignition back to the "OFF" position and then start the engine to confirm that the maintenance light is off.