how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)?

Honda Accord 11th Gen (2023-Present)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

332 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2017 Honda Accord. Step-by-step guide with diagnostic steps and verification instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Always ensure the vehicle is parked on a level surface before performing maintenance tasks

1
Start the vehicle and ensure it is in the 'ON' position (engine running or ignition on)
2
Check the dashboard for the current maintenance light status
3
Navigate to the trip meter by pressing the 'Select/Reset' button on the dashboard until the trip meter is displayed

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

2. Turn on the Ignition

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Confirm that all dashboard lights, including the maintenance light, are illuminated.

3. Reset the Maintenance Light

Press the "Select/Reset" button on the instrument panel until the trip meter shows "Oil Life."
Once "Oil Life" is displayed, press and hold the "Select/Reset" button until the display shows "Reset."
Release the "Select/Reset" button, then press and hold it again until the display confirms the reset (usually displaying "Oil Life 100%").
Turn off the ignition and then turn it back on to verify that the maintenance light has been reset.