how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Less than 10 minutes

Time

easy

Difficulty

low

Severity

2 min read

348 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2017 Honda Accord. Step-by-step guide for a quick and easy reset procedure.

Affected Component

Electrical

Estimated Time

Less than 10 minutes

Important safety information - read before proceeding

1
Ensure the ignition is turned off.
2
Press and hold the odometer reset button located on the instrument panel.
3
Turn the ignition key to the 'On' position without starting the engine.
4
Continue to hold the odometer reset button until the maintenance light blinks and then goes off.
5
Release the odometer reset button.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the ignition is turned off.
2
Press and hold the odometer reset button located on the instrument panel.
3
Turn the ignition key to the 'On' position without starting the engine.
4
Continue to hold the odometer reset button until the maintenance light blinks and then goes off.
5
Release the odometer reset button.

Solution

1. Preparation

Gather all necessary tools and ensure the vehicle is parked on a level surface.
Ensure the vehicle is in "Park" mode (for automatic transmissions) or in neutral (for manual transmissions).

2. Reset Maintenance Light

Ignition Off: Ensure the vehicle's ignition is turned off completely.
Odometer Button: Press and hold the odometer reset button on the dashboard.
Turn Ignition On: With the button still pressed, turn the ignition key to the "On" position (do not start the engine).
Wait for Light to Reset: Keep the button pressed until the maintenance light blinks and turns off. This may take about 10 seconds.
Release Button: Once the light is off, release the odometer reset button.