how to troubleshoot Honda Accord 9th Generation (2013-2017) ABS light on dashboard?

Honda Accord 10th Generation (2018-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

495 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to troubleshoot and fix the ABS light issue in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems
•Allow the vehicle to cool if working on brakes after use

Symptoms

•ABS warning light illuminated on the dashboard
•Possible decrease in braking performance
•Increased stopping distance
•Erratic behavior of the brake pedal (e.g., pulsation)
•Potential loss of traction control functionality

Diagnostic Steps

1
Scan the vehicle's computer system using an OBD-II scanner to retrieve any diagnostic trouble codes (DTCs)
2
Inspect the ABS fuse for continuity and ensure it is not blown
3
Check the brake fluid level in the master cylinder reservoir; ensure it meets the required level
4
Visually inspect ABS wheel speed sensors and wiring for damage or disconnections
5
Perform a continuity test on the ABS wheel speed sensors to verify their operation
6
Test the ABS module for proper function and communication with the vehicle's computer system

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Brake cleaner
•Safety glasses

Parts Required

•ABS wheel speed sensor (if faulty)
•ABS fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's computer system using an OBD-II scanner to retrieve any diagnostic trouble codes (DTCs)
2
Inspect the ABS fuse for continuity and ensure it is not blown
3
Check the brake fluid level in the master cylinder reservoir; ensure it meets the required level
4
Visually inspect ABS wheel speed sensors and wiring for damage or disconnections
5
Perform a continuity test on the ABS wheel speed sensors to verify their operation
6
Test the ABS module for proper function and communication with the vehicle's computer system

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface with the engine off.
Wear safety glasses and gloves for protection.

2. Retrieve and Clear Diagnostic Codes

Connect the OBD-II scanner to the vehicle’s diagnostic port.
Turn on the ignition without starting the engine.
Access the ABS module and note any stored DTCs.
Clear the codes to reset the ABS system.

3. Inspect ABS Components

Fuse Check:
1. Locate the fuse box under the dashboard or in the engine compartment.
2. Remove the ABS fuse and visually inspect it; replace if blown.
Brake Fluid Level:
1. Open the hood and locate the master cylinder.
2. Check the brake fluid level; add fluid if necessary, ensuring it meets the manufacturer's specifications.
Wheel Speed Sensors:
1. Raise the vehicle and remove the wheel to access the wheel speed sensors.
2. Inspect the sensors for dirt, debris, or physical damage.
3. Clean the sensors with brake cleaner if dirty.

4. Test and Replace Components if Necessary

Sensor Testing:
1. Using a multimeter, set it to measure resistance (ohms).
2. Disconnect the sensor connector and measure resistance at the terminals.
3. Compare readings with manufacturer specifications; replace the sensor if out of range.
ABS Module Testing:
1. Reconnect the scanner and check for any new codes after clearing.
2. If codes return, consider replacing the ABS module based on specific error codes.

5. Reassemble and Final Checks

Reinstall any components or wheels removed for inspection.
Tighten all bolts to manufacturer specifications.
Lower the vehicle and ensure everything is secure.

Tools Required:

OBD-II scanner
Multimeter
Socket set
Brake cleaner
Safety glasses

Parts Required:

ABS wheel speed sensor (if faulty)
ABS fuse (if blown)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Disconnect the battery before working on electrical systems.
Allow the vehicle to cool if working on brakes after use.