how to troubleshoot GMC Sierra T1XX (2019-Present) transmission jerking?

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

582 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to troubleshoot and fix transmission jerking in GMC Sierra T1XX (2019-Present). Step-by-step guide with diagnostic steps and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting the transmission fluid.

Symptoms

•Jerking or harsh shifting during acceleration
•Slipping sensation when changing gears
•Unusual noises during gear engagement
•Delayed response when shifting from park to drive
•Check engine light illuminated

Diagnostic Steps

1
Scan the vehicle's OBD-II for any error codes related to the transmission.
2
Check the transmission fluid level and condition, looking for signs of contamination or burning.
3
Inspect the transmission control module (TCM) for any faults or updates.
4
Examine the transmission mounts for wear or damage.
5
Test the throttle position sensor (TPS) to ensure proper function.
6
Check for any vacuum leaks that may affect transmission performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid pump
•Multimeter

Parts Required

•Transmission fluid
•Transmission control module (if replacement is needed)
•Transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II for any error codes related to the transmission.
2
Check the transmission fluid level and condition, looking for signs of contamination or burning.
3
Inspect the transmission control module (TCM) for any faults or updates.
4
Examine the transmission mounts for wear or damage.
5
Test the throttle position sensor (TPS) to ensure proper function.
6
Check for any vacuum leaks that may affect transmission performance.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical systems.

Tools Required:

OBD-II scanner
Socket set
Torque wrench
Transmission fluid pump
Multimeter

2. Check and Replace Transmission Fluid

Locate the transmission dipstick and remove it.
Assess fluid level and condition; if low or burnt, prepare to replace.
Using a transmission fluid pump, drain the old fluid from the transmission pan.
Replace the transmission fluid with the manufacturer's recommended type, ensuring the correct fluid level.
Reinstall the dipstick and ensure it is properly secured.

3. Inspect and Replace Transmission Control Module (if necessary)

Locate the TCM, typically found near the transmission or under the dashboard.
Disconnect the electrical connectors from the TCM.
Remove the mounting screws and carefully extract the TCM.
Install the new TCM and reconnect all electrical connectors.
Clear any error codes using the OBD-II scanner.

4. Examine and Replace Transmission Mounts

Safely lift the vehicle using a jack and secure with jack stands.
Locate the transmission mounts, usually found on both sides of the transmission.
Inspect for cracks or excessive wear; if damaged, remove the bolts securing the mount.
Replace with new mounts and torque to manufacturer specifications.

5. Test Throttle Position Sensor

Locate the TPS on the throttle body.
Disconnect the electrical connector and use a multimeter to check the resistance.
If readings are outside the specified range, replace the TPS.
Reconnect the electrical connector and ensure it is secured.