how to troubleshoot GMC Sierra T1XX (2019-Present) traction control light

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

514 words

Problem Statement

Learn how to troubleshoot and fix the traction control light issue in GMC Sierra T1XX (2019-present). Step-by-step guide with diagnostic steps and solutions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the vehicle to cool down before handling any engine components.

Symptoms

•Traction control light illuminated on the dashboard
•Reduced engine power or throttle response
•Unusual noises from the brakes during acceleration
•Vehicle may be slipping or losing traction during acceleration
•ABS warning light may also be illuminated
•Vehicle stability may feel compromised

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner to retrieve any stored error codes.
2
Inspect the wheel speed sensors for damage, dirt, or disconnection.
3
Check the brake fluid level and inspect for leaks in the brake system.
4
Inspect the ABS module and wiring for any signs of corrosion or damage.
5
Verify that the traction control switch is functioning correctly.
6
Test the vehicle's battery voltage and charging system to ensure proper power supply.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench

Parts Required

•Wheel speed sensors (if applicable)
•Traction control switch (if applicable)
•Brake fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Traction control light illuminated on the dashboard

•Reduced engine power or throttle response

•Unusual noises from the brakes during acceleration

•Vehicle may be slipping or losing traction during acceleration

•ABS warning light may also be illuminated

•Vehicle stability may feel compromised

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner to retrieve any stored error codes.
2
Inspect the wheel speed sensors for damage, dirt, or disconnection.
3
Check the brake fluid level and inspect for leaks in the brake system.
4
Inspect the ABS module and wiring for any signs of corrosion or damage.
5
Verify that the traction control switch is functioning correctly.
6
Test the vehicle's battery voltage and charging system to ensure proper power supply.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to ensure safety.
Tools required: OBD-II scanner, multimeter, socket set, torque wrench.

2. Check Wheel Speed Sensors

Locate the wheel speed sensors at each wheel hub.
Remove the sensor connectors and inspect the terminals for corrosion or damage.
Clean any dirt or debris from the sensor and the mounting area.
If damaged, replace the wheel speed sensors with new ones.

3. Inspect Brake System

Check the brake fluid reservoir for adequate fluid level; refill if low with the manufacturer-recommended fluid.
Inspect brake lines for leaks or damage. Repair or replace as necessary.
Ensure the ABS module is securely mounted and check for wiring issues.

4. Test Traction Control Switch

Locate the traction control switch on the dashboard.
Using a multimeter, check for continuity in the switch when pressed.
If the switch is faulty, replace it with a new switch.

5. Reconnect Battery and Clear Codes

Reconnect the negative battery terminal.
Use the OBD-II scanner to clear any error codes from the vehicle's computer.
Start the vehicle and check if the traction control light remains off.