how to fix my GMC Sierra T1XX (2019-Present) that won't connect to Bluetooth

GMC Sierra T1XX (2019-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

548 words

Problem Statement

Learn how to fix Bluetooth connection issues in GMC Sierra T1XX (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the negative battery cable before working on electrical systems.
•Ensure the vehicle is in a well-ventilated area when performing updates.

Symptoms

•Bluetooth connection fails or is not recognized by devices
•"Bluetooth not connected" message displayed on the infotainment screen
•Difficulty pairing devices
•Intermittent disconnection during use
•Audio plays through vehicle speakers when it should play through the connected device

Diagnostic Steps

1
Ensure Bluetooth is enabled on the smartphone or device attempting to connect.
2
Check for software updates for the vehicle's infotainment system.
3
Delete any previously paired devices from the vehicle's Bluetooth settings.
4
Restart both the vehicle's infotainment system and the smartphone or device.
5
Inspect the vehicle's fuse related to the infotainment system for any blown fuses.
6
Perform a factory reset of the infotainment system if issues persist.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Basic hand tools

Parts Required

•Replacement fuse

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure Bluetooth is enabled on the smartphone or device attempting to connect.
2
Check for software updates for the vehicle's infotainment system.
3
Delete any previously paired devices from the vehicle's Bluetooth settings.
4
Restart both the vehicle's infotainment system and the smartphone or device.
5
Inspect the vehicle's fuse related to the infotainment system for any blown fuses.
6
Perform a factory reset of the infotainment system if issues persist.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked safely with the engine off.
Disconnect the negative battery cable to prevent electrical shorts.

2. Update Infotainment System Software

Check for Updates:
- Turn on the vehicle and access the infotainment system.
- Navigate to "Settings" > "About" > "Software Updates".
- Follow prompts to update if available.
Install Update:
- If an update is found, follow the on-screen instructions to install it.
- Ensure the engine is running or the vehicle is in accessory mode during the update.

3. Reset Bluetooth Settings

Access Bluetooth Menu:
- Go to the "Settings" in the infotainment system.
- Select "Bluetooth" and choose "Delete All Devices".
Reboot Infotainment System:
- Turn off the vehicle and remove the key.
- Wait for 10 minutes to allow the system to reset.
Reconnect Device:
- Restart the vehicle, enable Bluetooth on your device, and attempt to pair again.

4. Inspect and Replace Fuse (if necessary)

Locate Fuse Box:
- Refer to the owner's manual to find the fuse box location.
Inspect Fuse:
- Remove the cover and check the fuse related to the infotainment system.
- Replace it if it is blown, using the same amperage fuse.

5. Factory Reset Infotainment System

Access Factory Reset:
- Navigate to "Settings" > "System" > "Factory Reset".
Confirm Reset:
- Follow prompts to confirm the reset process.
- Note that this will erase all settings and paired devices.

6. Reconnect Devices

After the reset, reconnect your Bluetooth devices following the pairing procedure.