how to fix my GMC Sierra T1XX (2019-Present) that has no sound from speakers

GMC Sierra T1XX (2019-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

502 words

Problem Statement

Learn how to diagnose and fix no sound from speakers in GMC Sierra T1XX. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the electrical system to prevent shocks or shorts.

Symptoms

•No audio output from speakers
•Dashboard audio controls are unresponsive
•"Audio Off" message displayed on screen
•Bluetooth connectivity issues
•"Check Audio System" warning message

Diagnostic Steps

1
Check the volume settings to ensure that the audio is not muted or set too low.
2
Verify that the audio source is correctly selected (radio, Bluetooth, USB, etc.).
3
Inspect the fuse for the audio system in the fuse box for any blown fuses.
4
Use an OBD-II scanner to check for any related error codes in the vehicle's audio system.
5
Perform a soft reset of the infotainment system by disconnecting the battery for a few minutes.
6
Inspect the wiring and connections behind the head unit and speakers for any loose or damaged wires.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Screwdrivers (Phillips and flathead)
•Wire stripper/crimper

Parts Required

•Replacement fuse
•Wiring harness

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the volume settings to ensure that the audio is not muted or set too low.
2
Verify that the audio source is correctly selected (radio, Bluetooth, USB, etc.).
3
Inspect the fuse for the audio system in the fuse box for any blown fuses.
4
Use an OBD-II scanner to check for any related error codes in the vehicle's audio system.
5
Perform a soft reset of the infotainment system by disconnecting the battery for a few minutes.
6
Inspect the wiring and connections behind the head unit and speakers for any loose or damaged wires.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked in a safe environment with the engine off.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Replace Fuses

Locate the fuse box, which is usually found under the dashboard on the driver’s side or in the engine compartment.
Reference the owner’s manual to identify the fuse related to the audio system.
Remove the fuse and inspect it visually for damage; replace it if blown.
Reinstall the fuse and reconnect the negative battery terminal.

3. Check Wiring and Connections

Remove the head unit from the dashboard by unscrewing the mounting screws.
Disconnect the wiring harness from the back of the head unit.
Inspect the connectors and wiring for any signs of damage or corrosion.
Reconnect the wiring harness securely and reinstall the head unit.

4. Test the Audio System

Reconnect the negative battery terminal.
Start the vehicle and turn on the audio system to test for sound output.
If sound is restored, proceed to secure the head unit back into place.