FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Genesis G70 make a clunking noise when shifting gears - Genesis G70
Home/Cars/Genesis/G70/IG (2017-2023)/why does my Genesis G70 make a clunking noise when shifting gears

why does my Genesis G70 make a clunking noise when shifting gears

Genesis G70 IG (2017-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
488 words

Problem Statement

Learn how to diagnose and fix clunking noise when shifting gears in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Clunking noise when shifting gears
  • •Noticeable delay in gear engagement
  • •Vibration felt through the floor or steering wheel
  • •Difficulty shifting into certain gears
  • •Possible check engine light illumination

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Transmission fluid pump
  • •Jack and jack stands
  • •Pry bar

Parts Required

  • •Transmission fluid (specific to Genesis G70)
  • •Motor mounts
  • •Transmission mounts
  • •Driveshaft or CV joints (if faulty)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Inspect and Top Off Transmission Fluid
  • Tools Required: Transmission fluid pump, funnel.
  • Check the transmission fluid level with the dipstick.
  • If low, add the manufacturer-recommended transmission fluid until the proper level is reached.
  • Inspect the fluid for burnt smell or metal shavings; if present, a transmission service may be needed.
3. Replace Worn Motor and Transmission Mounts
  • Tools Required: Jack and jack stands, socket set, torque wrench.
  • Safely lift the vehicle with jack stands.
  • Locate and visually inspect the motor and transmission mounts for cracks or separation.
  • Remove the bolts securing the mounts using a socket set.
  • Replace the mounts with new ones, ensuring they are properly aligned.
  • Torque the mount bolts to the manufacturer specifications.
4. Inspect Driveshaft and CV Joints
  • Tools Required: Socket set, pry bar.
  • Inspect the driveshaft for any visible damage or excessive play.
  • Use a pry bar to check the CV joints for any signs of wear or looseness.
  • If damaged, replace the driveshaft or CV joints as necessary.