my Genesis G70 IG (2017-2023) transmission is jerking when shifting, what's wrong

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

556 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Genesis G70 (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening any components related to the transmission.

Symptoms

•Jerking or harsh shifting during acceleration
•Delayed engagement when shifting from park to drive or reverse
•Slipping sensation during gear changes
•Possible check engine light illuminated
•Unusual noises (grinding or whining) during shifting

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for transmission-related trouble codes.
2
Inspect the transmission fluid level and condition; look for discoloration or burnt smell.
3
Check for visible leaks around the transmission pan and cooler lines.
4
Test the transmission solenoids' operation using a multimeter to ensure proper function.
5
Perform a road test to observe shifting behavior under various driving conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Torque wrench
•Transmission fluid pump

Parts Required

•Transmission fluid (manufacturer-recommended type)
•Transmission filter (if applicable)
•Gasket for transmission pan

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for transmission-related trouble codes.
2
Inspect the transmission fluid level and condition; look for discoloration or burnt smell.
3
Check for visible leaks around the transmission pan and cooler lines.
4
Test the transmission solenoids' operation using a multimeter to ensure proper function.
5
Perform a road test to observe shifting behavior under various driving conditions.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, multimeter, torque wrench, transmission fluid pump.
Disconnect the vehicle's battery to ensure safety while working on electrical components.
Allow the vehicle to cool before working on the transmission system.

2. Inspect and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick or fill plug; remove it to check fluid level.
2. If fluid is low or contaminated, drain the old fluid using a fluid pump through the drain plug.
3. Replace the old fluid with new manufacturer-recommended transmission fluid (check owner's manual for specifications).
4. Refill the transmission fluid through the dipstick tube or fill plug until the correct level is reached.
5. Start the engine and allow it to warm up; check fluid level again and top off if necessary.

3. Inspect and Replace Transmission Filter (if applicable)

Sub-steps:
1. Remove the transmission pan by unscrewing the bolts (use a torque wrench for proper torque when re-installing).
2. Carefully lower the pan and remove the old filter from the transmission.
3. Install the new transmission filter.
4. Clean the pan and install a new gasket before reattaching the pan.

4. Test Transmission Solenoids

Sub-steps:
1. Disconnect the electrical connectors from the transmission solenoids.
2. Use a multimeter to test the resistance of each solenoid according to manufacturer specifications.
3. Replace any solenoids that do not meet specifications.

5. Reassemble and Test Drive

Sub-steps:
1. Reconnect the battery after all repairs are complete.
2. Start the vehicle and allow it to idle; check for any leaks.
3. Perform a test drive to ensure smooth shifting and check for any remaining jerking.