how do I replace the battery in my Genesis G70 IG (2017-2023) key fob?

Genesis G70 IG (2017-2023)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

3 min read

405 words

Problem Statement

Learn how to replace the battery in your Genesis G70 IG key fob (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Handle the battery with care to avoid short-circuiting or damaging the key fob's internal components.

Symptoms

•Key fob buttons are unresponsive
•Range of the key fob is significantly reduced
•Warning message on dashboard about key fob battery
•Difficulty unlocking or starting the vehicle

Diagnostic Steps

1
Verify the key fob's current battery status by testing its operation.
2
Check for any physical damage to the key fob.
3
Confirm that the vehicle's receiver is functioning properly by testing other key fobs if available.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Coin

Parts Required

•CR2032 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure you are working in a clean area to prevent losing small components.

2. Open the Key Fob

Use a flathead screwdriver or a coin to gently pry open the key fob along the seam.
Start at one end and carefully work your way around to avoid damaging the plastic.

3. Remove the Old Battery

Once the key fob is open, locate the battery.
Take note of the battery orientation (+ and -) before removing it.
Carefully remove the old battery using your fingers or a non-metallic tool.

4. Install the New Battery

Insert the new battery in the same orientation as the old one (usually a CR2032).
Ensure it is seated properly in the battery compartment.

5. Reassemble the Key Fob

Align the two halves of the key fob.
Press firmly around the edges until you hear a click, indicating it is securely closed.
Avoid excessive force that could break the plastic.