how to reset the tire pressure light on Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

10-15 minutes

Time

easy

Difficulty

medium

Severity

2 min read

397 words

Problem Statement

Learn how to reset the tire pressure light on your 2021-present Ford F-150. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

10-15 minutes

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat, stable surface before performing any tire pressure adjustments.

1
Ensure all tires are inflated to the recommended pressure as indicated on the driver's side door jamb.
2
Turn the ignition to the 'On' position without starting the engine.
3
Locate the tire pressure monitoring system (TPMS) reset button, typically found beneath the steering column or on the lower left side of the dashboard.
4
Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.
5
Start the engine and allow the vehicle to run for a few minutes to complete the reset process.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure as indicated on the driver's side door jamb.
2
Turn the ignition to the 'On' position without starting the engine.
3
Locate the tire pressure monitoring system (TPMS) reset button, typically found beneath the steering column or on the lower left side of the dashboard.
4
Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.
5
Start the engine and allow the vehicle to run for a few minutes to complete the reset process.

Solution

1. Preparation

Gather necessary tools: none required for this reset.
Ensure tires are properly inflated according to the manufacturer’s specifications.

2. Reset TPMS

Access TPMS Reset Button
- Locate the TPMS reset button under the steering column or dashboard.
Initiate Reset Process
- Turn the ignition to the "On" position without starting the engine.
- Press and hold the TPMS reset button.
Confirm Reset
- Observe the tire pressure warning light; it should blink three times.
- Release the TPMS reset button.
Engine Start
- Start the engine and let it run for a few minutes to finalize the reset.
- The tire pressure light should turn off if the reset was successful.