how to clear codes from Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

413 words

Problem Statement

Learn how to clear diagnostic trouble codes from your Ford F-150 (2021-present) using an OBD-II scanner. Step-by-step instructions included.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged before starting the process.

Symptoms

•Check engine light illuminated
•Stored trouble codes present in the vehicle's computer
•Issues associated with the triggered codes

Diagnostic Steps

1
Connect an OBD-II scanner to the vehicle's diagnostic port.
2
Turn the ignition key to the 'On' position without starting the engine.
3
Navigate through the scanner's menu to access the stored trouble codes.
4
Review the codes and ensure they are resolved or noted for further inspection.
5
Select the option to clear or erase the codes from the vehicle's computer.
6
Disconnect the OBD-II scanner from the diagnostic port.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None (if no repairs are needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Connect an OBD-II scanner to the vehicle's diagnostic port.
2
Turn the ignition key to the 'On' position without starting the engine.
3
Navigate through the scanner's menu to access the stored trouble codes.
4
Review the codes and ensure they are resolved or noted for further inspection.
5
Select the option to clear or erase the codes from the vehicle's computer.
6
Disconnect the OBD-II scanner from the diagnostic port.

Solution

1. Preparation

Gather tools and ensure you have an OBD-II scanner compatible with Ford vehicles.
Ensure the vehicle is parked on a flat surface and the engine is off.

2. Connect OBD-II Scanner

Locate the OBD-II port, usually found under the dashboard near the steering column.
Plug the OBD-II scanner into the port securely.

3. Turn On Ignition

Turn the ignition key to the "On" position without starting the engine.
The dashboard lights should illuminate, indicating the power is on.

4. Access Codes

Use the scanner's interface to select the "Read Codes" option.
Review all stored codes displayed on the scanner.

5. Clear Codes

Select the "Clear Codes" or "Erase Codes" option on the scanner.
Confirm your selection when prompted to ensure the codes are erased.

6. Disconnect Scanner

Safely unplug the OBD-II scanner from the port.
Turn off the ignition to complete the process.