FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford F-150 14th Generation (2021-2024) have a check engine light after oil change - Ford F-150
Home/Cars/Ford/F-150/14th Generation (2021-2024)/why does my Ford F-150 14th Generation (2021-2024) have a check engine light after oil change

why does my Ford F-150 14th Generation (2021-2024) have a check engine light after oil change

Ford F-150 14th Generation (2021-2024)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
582 words

Problem Statement

Learn how to diagnose and fix the check engine light issue after an oil change in a Ford F-150 (2021-2024). Step-by-step guide with diagnostic procedures.

Affected Component
Engine
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the engine is cool before working on it to avoid burns
  • •Disconnect the battery before working on electrical systems to prevent shocks or shorts

Symptoms

  • •Check engine light illuminated
  • •Possible decrease in engine performance
  • •Oil pressure warning light may also be present
  • •Unusual engine noises (ticking or knocking)
  • •Oil leak detected under the vehicle
  • •Poor fuel economy

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Oil filter wrench
  • •Multimeter
  • •Rags for cleanup

Parts Required

  • •Engine oil (correct type)
  • •Oil filter (if replacement is needed)

Additional Information

Affected Component
Engine
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, socket set, oil filter wrench, multimeter, rags for cleanup.
  • Safety Warnings: Ensure the engine is cool before working on it to avoid burns.
2. Scan for Diagnostic Codes
  • Connect the OBD-II scanner to the vehicle’s diagnostic port.
  • Turn on the ignition without starting the engine.
  • Retrieve and note any error codes present.
3. Check Engine Oil Level
  • Remove the dipstick, clean it with a rag, and reinsert it fully.
  • Pull it out again to check the oil level. Add oil if necessary to achieve the correct level.
4. Inspect and Replace Oil Filter
  • If the oil filter is suspected to be leaking, use the oil filter wrench to remove it.
  • Lubricate the rubber O-ring of the new oil filter with fresh oil.
  • Install the new filter, ensuring it is tightened to the manufacturer's specifications (typically hand-tight plus 3/4 turn).
5. Verify Oil Type and Fill
  • Check the oil fill cap and owner’s manual to confirm the correct oil type (e.g., 5W-20).
  • If the incorrect oil was used, drain the oil and replace it with the correct type.
6. Check Electrical Connections
  • Inspect the wiring harnesses and connectors for the oil pressure and level sensors.
  • Ensure all connections are secure and free of corrosion. Repair or replace any damaged components.