FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil change light on my Ford F-150 14th Generation (2021-2024) - Ford F-150
Home/Cars/Ford/F-150/14th Generation (2021-2024)/how to reset the oil change light on my Ford F-150 14th Generation (2021-2024)

how to reset the oil change light on my Ford F-150 14th Generation (2021-2024)

Ford F-150 14th Generation (2021-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
414 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 (2021-2024) with this step-by-step guide. Ensure your vehicle is properly maintained.

Affected Component
Engine
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before performing the reset.

Symptoms

  • •Oil change light is illuminated on the dashboard
  • •Possible notification message on the display indicating 'Oil Change Required'
  • •Engine performance may be affected if oil change is overdue
  • •Reduced fuel efficiency if oil is not changed timely

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required for this procedure.

Parts Required

  • •None required for the reset process.

Additional Information

Affected Component
Engine
Estimated Time
5-10 minutes
Difficulty
easy
Severity
medium
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Keep the vehicle in the "Off" position during the reset process.
2. Reset Oil Change Light
  1. Turn Off Ignition: Ensure the ignition is turned off completely.
  2. Press and Hold Gas Pedal: Fully depress the gas pedal and hold it down.
  3. Turn Ignition On: While holding the gas pedal, turn the ignition to the "On" position (do not start the engine).
  4. Wait for Light Reset: Continue to hold the gas pedal down for approximately 10 seconds. Observe the dashboard for the oil change light.
  5. Releasing the Gas Pedal: Once the oil change light flashes and then turns off, release the gas pedal.
  6. Turn Off Ignition Again: Turn the ignition back to the "Off" position and then start the engine to verify the light is no longer illuminated.