why is my Ford F-150 13th Generation (2015-2020) using so much gas lately

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

514 words

Problem Statement

Learn how to diagnose and fix fuel consumption issues in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Ensure the engine is cool before handling any components.

Symptoms

•Check engine light illuminated
•Decreased miles per gallon (MPG)
•Rough idle or engine misfires
•Unusual exhaust smells (e.g., strong gasoline odor)
•Loss of power during acceleration
•Increased engine noise

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any potential engine issues.
2
Check fuel trim readings to assess if the engine is running rich or lean.
3
Inspect the air filter for blockages or excessive dirt.
4
Examine fuel injector operation and cleanliness.
5
Verify tire pressure and condition to rule out rolling resistance issues.
6
Assess the condition of spark plugs and ignition coils for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Screwdriver set
•Socket set
•Spark plug socket
•Torque wrench
•Fuel injector cleaning kit

Parts Required

•Air filter
•Fuel injector cleaner
•Spark plugs

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any potential engine issues.
2
Check fuel trim readings to assess if the engine is running rich or lean.
3
Inspect the air filter for blockages or excessive dirt.
4
Examine fuel injector operation and cleanliness.
5
Verify tire pressure and condition to rule out rolling resistance issues.
6
Assess the condition of spark plugs and ignition coils for wear or damage.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Replace Air Filter

Remove the air filter housing cover using a screwdriver or socket set.
Take out the old air filter and inspect for dirt or clogging.
Install a new air filter, ensuring it fits snugly in the housing.
Reattach the air filter housing cover securely.

3. Clean Fuel Injectors

Use a fuel injector cleaner or a professional cleaning kit.
Disconnect the fuel injectors from the fuel rail.
Apply the cleaner according to the product instructions while the engine is running.
Reconnect the fuel injectors and ensure all connections are secure.

4. Replace Spark Plugs

Remove the ignition coil packs by unscrewing them and disconnecting the electrical connector.
Use a spark plug socket to remove the old spark plugs.
Check the gap on the new spark plugs and install them with the specified torque (typically around 13 ft-lbs).
Reattach the ignition coil packs.

5. Verify Fuel Trim

Reconnect the negative battery terminal.
Start the engine and use the OBD-II scanner to monitor fuel trim readings.
Ensure the readings are within manufacturer specifications (typically between -5% and +5% for optimal performance).