why is my Ford F-150 13th Generation (2015-2020) blind spot monitoring not working

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

481 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix blind spot monitoring issues in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems to avoid short circuits.

Symptoms

•Blind spot monitoring warning light is not illuminated
•No audible alerts when a vehicle is in the blind spot
•Blind spot monitoring feature not activating when turning on the vehicle
•Check Blind Spot Monitor message displayed on the dashboard
•Inconsistent performance of the system

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any fault codes related to the blind spot monitoring system.
2
Inspect the blind spot monitoring sensors located in the rearview mirrors for any damage or obstructions.
3
Check the electrical connections to the blind spot monitoring system for corrosion or loose connections.
4
Verify the functionality of the system by performing a visual inspection of the indicator lights on the mirrors.
5
Test the system's calibration by following the manufacturer's procedure for recalibrating the sensors if necessary.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Screwdriver set
•Soft cloth for cleaning
•Dielectric grease

Parts Required

•Replacement sensors (if damaged)
•Electrical connectors (if corroded or damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any fault codes related to the blind spot monitoring system.
2
Inspect the blind spot monitoring sensors located in the rearview mirrors for any damage or obstructions.
3
Check the electrical connections to the blind spot monitoring system for corrosion or loose connections.
4
Verify the functionality of the system by performing a visual inspection of the indicator lights on the mirrors.
5
Test the system's calibration by following the manufacturer's procedure for recalibrating the sensors if necessary.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the vehicle battery to prevent electrical shorts.
Ensure the vehicle is parked on a flat surface.

2. Inspect and Clean Sensors

Using a soft cloth, clean the blind spot monitoring sensors located on the rearview mirrors.
Check for any physical obstructions such as dirt or debris that may block the sensors.

3. Check Connections

Remove the door panels to access the wiring harness connected to the blind spot monitoring sensors.
Inspect the connectors for any signs of corrosion or damage.
Reconnect any loose connections and apply dielectric grease to prevent future corrosion.

4. Recalibrate Sensors

Follow the manufacturer's instructions to recalibrate the blind spot monitoring system.
This may involve driving the vehicle at a specific speed or in a certain pattern.

5. Reconnect Battery and Test

Reconnect the vehicle battery.
Start the vehicle and check if the blind spot monitoring system activates properly.
Confirm that the warning lights function as expected during a test drive.