FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford F-150 13th Generation (2015-2020) not accelerate properly - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/why does my Ford F-150 13th Generation (2015-2020) not accelerate properly

why does my Ford F-150 13th Generation (2015-2020) not accelerate properly

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
563 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix acceleration issues in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing any maintenance to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Loss of power during acceleration
  • •Engine stalling or hesitation
  • •Poor fuel economy
  • •Unusual engine noises (e.g., knocking or sputtering)
  • •Increased emissions or visible exhaust smoke

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Multimeter
  • •Throttle body cleaner

Parts Required

  • •Fuel filter
  • •Spark plugs
  • •Ignition coils (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Disconnect the negative battery terminal to ensure safety while working on electrical components.
2. Address Faulty Components

A. Fuel System

  1. Fuel Pressure Test:

    • Connect a fuel pressure gauge to the fuel rail.
    • Start the engine and check if the pressure meets specifications (typically between 30-60 PSI for F-150).
    • Replace the fuel pump if pressure is low.

  2. Fuel Filter Replacement:

    • Locate the fuel filter (if applicable).
    • Use a wrench to disconnect the fuel lines.
    • Replace the old filter with a new one, ensuring proper orientation.

B. Throttle Body Cleaning

  1. Remove Throttle Body:

    • Disconnect the electrical connector and any vacuum hoses.
    • Remove the throttle body mounting bolts using a socket set.
    • Carefully detach the throttle body from the intake manifold.

  2. Clean Throttle Body:

    • Use throttle body cleaner and a soft brush to clean the inside surfaces.
    • Ensure the throttle plate operates smoothly without sticking.
    • Reinstall the throttle body with new gaskets if necessary.
3. Ignition System Check

  1. Inspect Spark Plugs:

    • Remove spark plug wires and use a spark plug socket to remove plugs.
    • Examine for wear or fouling and replace if necessary (typically every 30,000-100,000 miles depending on type).

  2. Test Ignition Coils:

    • Use a multimeter to check for proper resistance in each ignition coil.
    • Replace any coils that show signs of failure.
4. Transmission Fluid Check
  1. Check Fluid Level:
    • Locate the transmission dipstick.
    • Ensure the vehicle is at operating temperature and check the fluid level.
    • Add transmission fluid if low and inspect for leaks.