what causes my Ford F-150 13th Generation (2015-2020) to stall while driving?

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

505 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine stalling issues in Ford F-150 13th Generation (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening any components.

Symptoms

•Check engine light illuminated
•Engine suddenly shuts off while driving
•Rough idling before stalling
•Loss of power during acceleration
•Difficulty restarting the engine after stalling
•Poor fuel economy

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying issues.
2
Inspect the fuel system for blockages or leaks, including the fuel pump and filter.
3
Check the ignition system, including spark plugs and ignition coils, for wear or failure.
4
Examine the air intake system for obstructions, including the air filter and mass airflow sensor.
5
Test the battery and alternator to ensure proper electrical supply.
6
Inspect the throttle body for carbon buildup or mechanical issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Socket set
•Multimeter
•Screwdriver set
•Throttle body cleaner
•MAF cleaner

Parts Required

•Fuel filter
•Spark plugs
•Ignition coils (if faulty)
•Air filter
•Battery (if needed)
•Alternator (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying issues.
2
Inspect the fuel system for blockages or leaks, including the fuel pump and filter.
3
Check the ignition system, including spark plugs and ignition coils, for wear or failure.
4
Examine the air intake system for obstructions, including the air filter and mass airflow sensor.
5
Test the battery and alternator to ensure proper electrical supply.
6
Inspect the throttle body for carbon buildup or mechanical issues.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety while working on the vehicle.

2. Inspect and Clean Fuel System

Sub-steps:
1. Locate the fuel filter and replace it if clogged.
2. Confirm the fuel pump is functioning correctly by checking fuel pressure with a gauge.
3. If the fuel pump is faulty, replace it according to manufacturer specifications.
Tools Required: Fuel pressure gauge, socket set.

3. Examine and Replace Ignition Components

Sub-steps:
1. Remove and inspect the spark plugs for wear; replace if necessary.
2. Test ignition coils with a multimeter; replace any faulty coils.
Tools Required: Socket set, multimeter.

4. Clean Air Intake System

Sub-steps:
1. Remove the air filter; replace if dirty or clogged.
2. Clean the mass airflow sensor using MAF cleaner.
3. Inspect and clean the throttle body using throttle body cleaner.
Tools Required: Screwdriver set, throttle body cleaner, MAF cleaner.

5. Test and Replace Battery/Alternator

Sub-steps:
1. Use a multimeter to check the battery voltage; replace if below 12.4 volts.
2. Test the alternator output; if it’s below 13.5 volts while running, replace it.
Tools Required: Multimeter, socket set.