FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford F-150 13th Generation (2015-2020) dashboard lights are flickering what's wrong - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/my Ford F-150 13th Generation (2015-2020) dashboard lights are flickering what's wrong

my Ford F-150 13th Generation (2015-2020) dashboard lights are flickering what's wrong

Ford F-150 13th Generation (2015-2020)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
485 words

Problem Statement

Learn how to diagnose and fix flickering dashboard lights in Ford F-150 (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid short circuits and electrical shock.

Symptoms

  • •Dashboard lights flickering intermittently
  • •Possible dimming of headlights when dashboard lights flicker
  • •Battery warning light illuminated on the dashboard
  • •Vehicle may exhibit difficulty starting
  • •Electrical accessories (e.g., radio, power windows) may function erratically

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Battery load tester
  • •Socket set
  • •Wire brush

Parts Required

  • •Battery (if deemed faulty)
  • •Alternator (if replacement is necessary)
  • •Fuses (if any are blown)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required:
    • OBD-II scanner
    • Multimeter
    • Battery load tester
    • Socket set
    • Wire brush (for cleaning)
  • Disconnect the negative battery terminal to ensure safety while working on electrical components.
2. Battery and Connections Inspection
  • Inspect the battery terminals for corrosion. If corrosion is present, clean the terminals using a wire brush.
  • Ensure that the battery terminals are tight and secure.
  • Reconnect the negative battery terminal after cleaning.
3. Alternator Output Test
  • Use a multimeter to measure the voltage at the battery terminals while the engine is running.
  • The voltage should read between 13.7 to 14.7 volts. If it is lower, the alternator may need to be replaced.
  • If the alternator is faulty, proceed to replace it.
4. Wiring and Fuses Inspection
  • Inspect the wiring harness connected to the dashboard for any signs of wear, fraying, or loose connections.
  • Check the fuses related to dashboard lights and accessories; replace any blown fuses.
5. Final Assembly
  • Ensure all connections are secure, and reattach any components that were removed during inspection.
  • Reconnect the battery terminal.