how to reset the service engine soon light on my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

380 words

Problem Statement

Learn how to reset the Service Engine Soon light on your Ford F-150 (2015-2020). Step-by-step guide with diagnostic procedures and tools required.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before performing any diagnostic work

Symptoms

•Service Engine Soon light is illuminated
•Possible diagnostic trouble codes (DTCs) stored in the vehicle's computer
•Vehicle performance may be affected
•Check for other warning lights illuminated

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Review codes to identify specific codes that triggered the light
3
Address underlying issues based on the codes before resetting the light

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Ignition key

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner, ignition key.
Ensure the vehicle is parked on a level surface with the engine off.

2. Access OBD-II Port

Locate the OBD-II port under the dashboard, usually near the driver's side.
Plug in the OBD-II scanner.

3. Turn Ignition On

Insert the ignition key and turn it to the "On" position without starting the engine.
Make sure all electrical accessories are off.

4. Reset the Codes

Follow the prompts on the OBD-II scanner to access the "Erase Codes" or "Clear Codes" option.
Confirm the action to clear any stored codes, which should turn off the "Service Engine Soon" light.

5. Disconnect OBD-II Scanner

Remove the scanner from the OBD-II port.
Turn off the ignition and then restart the engine to verify the light is off.