how to reset the power steering assist on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

1 hour

Time

medium

Difficulty

high

Severity

3 min read

465 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the power steering assist on Ford F-150 (2015-2020). Step-by-step guide with diagnostic steps, tools required, and safety warnings.

Affected Component

Steering

Estimated Time

1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or shorts.
•Allow the engine to cool before performing any inspections on the power steering system.

Symptoms

•Power steering warning light illuminated on the dashboard
•Difficulty steering the vehicle, particularly at low speeds
•Sudden loss of power steering assist while driving
•Erratic or inconsistent steering response
•Noisy steering when turning the wheel

Diagnostic Steps

1
Check for any Diagnostic Trouble Codes (DTCs) using an OBD-II scanner.
2
Inspect the power steering fluid level and condition.
3
Examine the power steering module and wiring for any visible damage.
4
Test the battery voltage to ensure it is within the proper range (12.4 - 12.7 volts).
5
Perform a visual inspection of the power steering belt for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Basic socket set
•Torque wrench
•Multimeter

Parts Required

•Power steering fluid (if low)
•Replacement power steering module (if diagnosed as faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any Diagnostic Trouble Codes (DTCs) using an OBD-II scanner.
2
Inspect the power steering fluid level and condition.
3
Examine the power steering module and wiring for any visible damage.
4
Test the battery voltage to ensure it is within the proper range (12.4 - 12.7 volts).
5
Perform a visual inspection of the power steering belt for wear or damage.

Solution

1. Preparation

Tools Required: OBD-II scanner, basic socket set, torque wrench, multimeter.
Disconnect the negative battery terminal to prevent electrical shorts.
Gather all necessary tools and parts before starting the procedure.

2. Resetting the Power Steering Assist

Reconnect the Battery:
- Reconnect the negative battery terminal.
- Tighten the connection securely to prevent any disconnection while driving.
Perform a Battery Reset:
- Start the vehicle and let it run for at least 5 minutes.
- Turn the steering wheel fully left and right several times while the vehicle is stationary to help the system recalibrate.
- Turn off the ignition.
Scan for Codes:
- Use the OBD-II scanner to check for any remaining codes that may indicate issues.
- Clear any codes found related to the power steering system.
Test Drive the Vehicle:
- Take the vehicle for a short test drive to confirm that the power steering assist is functioning correctly and that there are no warning lights illuminated.