how to reset the oil change light on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

351 words

Problem Statement

Learn how to reset the oil change light on Ford F-150 13th Generation (2015-2020) with this easy step-by-step guide. Ensure your vehicle is ready to go!

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Possible reminder message on the instrument cluster
•Engine running smoothly (if oil change has been performed)

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Check if the oil change has actually been performed and all fluids are at the correct levels.
3
Confirm that the vehicle is in park (for automatic transmission) or neutral (for manual transmission).

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools: none are required for this procedure.

Turn the ignition to the "On" position without starting the engine.
Use the arrow buttons on the steering wheel to navigate through the instrument cluster display.
Scroll to the "Settings" menu.

3. Reset the Oil Change Light

Within the "Settings" menu, navigate to "Oil Life" or "Oil Change."
Select the "Reset" option using the appropriate button (usually "OK" or "Enter").
Confirm the reset when prompted.

4. Verify the Reset

Exit the settings menu and turn off the ignition.
Turn the ignition back to the "On" position and verify that the oil change light is no longer illuminated.