how to reset the oil change light in my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

325 words

Problem Statement

Learn how to reset the oil change light in your Ford F-150 (2015-2020) with this easy step-by-step guide. Ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and the parking brake is engaged.

Symptoms

•Oil change light illuminated on the dashboard
•Potentially incorrect maintenance reminders displayed
•Engine oil may have been recently changed

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Turn the ignition off and then back to the 'ON' position to verify the light reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this task.

Parts Required

•None specifically required for this task.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools; no special tools are required for this task.

2. Access the Ignition

Enter the vehicle and close all doors.
Insert the key into the ignition or have the key fob inside the vehicle.

3. Reset the Oil Change Light

Turn the Ignition On: Turn the key to the "ON" position (do not start the engine).
Press the Gas Pedal: Firmly press the gas pedal three times within 10 seconds.
Turn the Ignition Off: Turn the key back to the "OFF" position.
Turn the Ignition On Again: Turn the key back to the "ON" position to check if the oil change light has reset.