how to reset the maintenance light on a Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

339 words

Problem Statement

Learn how to reset the maintenance light on a Ford F-150 (2015-2020) with this quick guide. Step-by-step instructions for a hassle-free reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (automatic) or neutral (manual) before turning the ignition on.

Symptoms

•Maintenance light illuminated on the dashboard
•No engine performance issues
•Service reminder not cleared after maintenance work

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Observe the dashboard for a confirmation message indicating the maintenance light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob (for push-button start)

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is in a safe location with the engine off.
Gather the necessary tools for accessing the vehicle's ignition system (if necessary).

2. Turn Ignition On

Insert the key into the ignition or press the start button without pressing the brake pedal.
Turn the key to the "On" position (or press the button) to power the electrical systems without starting the engine.

3. Reset Maintenance Light

Quickly press the gas pedal three times within a span of 10 seconds.
Observe the dashboard lights; the maintenance light should either turn off or change to a different state indicating it has been reset.

4. Confirmation

Turn the ignition off, then turn it back on to verify that the maintenance light is no longer illuminated.