how to reset the check engine light on a Ford F-150 13th Generation?

Ford F-150 13th Generation (2015-2020)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

386 words

Problem Statement

Learn how to reset the check engine light on a Ford F-150 13th Generation. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is in park with the engine off while connecting the OBD-II scanner.

Symptoms

•Check engine light illuminated
•No noticeable performance issues
•Engine running smoothly prior to the light activation

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to retrieve any stored error codes.
2
Document the error codes to identify any underlying issues that may need attention.
3
Clear the error codes using the OBD-II scanner to reset the check engine light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Owner's manual

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather the necessary tools: OBD-II scanner, owner's manual (for reference).
Ensure that the vehicle is parked on a level surface and the engine is turned off.

2. Connect the OBD-II Scanner

Locate the OBD-II port under the dashboard on the driver’s side.
Plug the OBD-II scanner into the port.

3. Retrieve Error Codes

Turn the ignition key to the "On" position without starting the engine (or press the start button without pressing the brake pedal if equipped).
Follow the scanner's instructions to access and read any stored error codes.
Note down any codes for your records.

4. Clear the Error Codes

Use the scanner’s menu to find the option to "Clear Codes" or "Erase Codes."
Confirm the action when prompted by the scanner.
Disconnect the scanner once the codes are cleared.

5. Test the Vehicle

Start the engine to check if the check engine light remains off.
Drive the vehicle under normal conditions to ensure that the light does not reappear.