how to fix parking sensors not working in Ford F-150 13th Generation?

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

492 words

Problem Statement

Learn how to diagnose and fix parking sensors not working in Ford F-150 13th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the electrical system to avoid shorts or shocks.

Symptoms

•Parking sensor warning light illuminated on the dashboard
•No audible alerts when reversing
•Sensors do not detect objects or provide feedback
•Check engine light may also be illuminated (if related to the issue)
•Inconsistent sensor performance (occasional working)

Diagnostic Steps

1
Inspect the sensor wiring harness for any visible damage or disconnection.
2
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the parking sensors.
3
Test each individual parking sensor using a multimeter to measure electrical resistance.
4
Check the vehicle’s fuse box for any blown fuses related to the parking sensor system.
5
Clean any dirt or debris from the sensor surfaces that may affect performance.
6
Verify that the parking sensor module is receiving power by testing the relevant connector.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers
•Cleaning cloth

Parts Required

•Replacement parking sensors (if faulty)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the sensor wiring harness for any visible damage or disconnection.
2
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the parking sensors.
3
Test each individual parking sensor using a multimeter to measure electrical resistance.
4
Check the vehicle’s fuse box for any blown fuses related to the parking sensor system.
5
Clean any dirt or debris from the sensor surfaces that may affect performance.
6
Verify that the parking sensor module is receiving power by testing the relevant connector.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Tools Required: OBD-II scanner, multimeter, socket set, screwdrivers, cleaning cloth.
Parts Required: Replacement parking sensors (if faulty), fuses (if blown).

2. Inspect and Repair Wiring

Sub-steps:
1. Disconnect the negative battery terminal to ensure safety.
2. Remove the rear bumper cover to access the parking sensor wiring harness.
3. Visually inspect the wiring harness for frays, corrosion, or loose connections.
4. Repair or replace any damaged wiring or connectors.
5. Reconnect the harness and reattach the bumper cover.

3. Replace Faulty Sensors

Sub-steps:
1. Identify the non-functioning sensors from the diagnostic tests.
2. Disconnect the wiring connector from the faulty sensor.
3. Remove the sensor from its mounting location (may require a socket or screwdriver).
4. Install the new sensor by reversing the removal process.
5. Reconnect the wiring harness.

4. Test and Reassemble

Sub-steps:
1. Reconnect the negative battery terminal.
2. Turn on the ignition and check for any warning lights related to parking sensors.
3. Test the parking sensors by placing obstacles behind the vehicle and observing if they detect objects.
4. If successful, reassemble any remaining components.