how to fix P0700 transmission trouble code on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

566 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission trouble code in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on the transmission.

Symptoms

•Check engine light illuminated
•Delayed or harsh shifting during gear changes
•Transmission slipping or failing to engage
•Loss of power to wheels
•Unusual noises from the transmission
•Transmission fluid leaks

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve any related transmission codes.
2
Inspect the transmission fluid levels and condition (color, smell).
3
Check for any visible leaks around the transmission housing and seals.
4
Inspect the wiring and connectors leading to the transmission control module (TCM).
5
Test the TCM for proper functionality using a multimeter.
6
Review the vehicle’s service history for previous transmission repairs or issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Fluid pump
•Drain pan
•Electrical contact cleaner

Parts Required

•Transmission fluid
•Transmission filter (if applicable)
•TCM (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve any related transmission codes.
2
Inspect the transmission fluid levels and condition (color, smell).
3
Check for any visible leaks around the transmission housing and seals.
4
Inspect the wiring and connectors leading to the transmission control module (TCM).
5
Test the TCM for proper functionality using a multimeter.
6
Review the vehicle’s service history for previous transmission repairs or issues.

Solution

1. Preparation

Gather tools and parts needed for repair.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to prevent electrical shorts.

2. Transmission Fluid Replacement

Tools Required: Socket set, torque wrench, fluid pump, drain pan, new transmission fluid.
Sub-steps:
1. Place a drain pan under the transmission pan.
2. Remove the bolts from the transmission pan using a socket set and carefully lower the pan to drain fluid.
3. Inspect the pan for metal shavings or debris; clean if necessary.
4. Replace the transmission filter if applicable.
5. Reinstall the transmission pan and torque bolts to manufacturer specifications (typically around 10-12 ft-lbs).
6. Refill the transmission with the correct type and quantity of fluid (consult owner’s manual for specifications).

3. Inspect and Repair Electrical Connections

Tools Required: Multimeter, electrical contact cleaner.
Sub-steps:
1. Visually inspect the wiring harness and connectors for signs of damage or corrosion.
2. Use a multimeter to test for continuity and voltage at the TCM connector.
3. Clean any corroded connections with electrical contact cleaner.
4. Repair or replace any damaged wiring or connectors as needed.

4. TCM Replacement (if necessary)

Tools Required: Socket set, torque wrench.
Sub-steps:
1. Locate the TCM (usually found near the transmission).
2. Disconnect the electrical connectors from the TCM.
3. Remove the mounting bolts and take out the old TCM.
4. Install the new TCM, securing it with mounting bolts to manufacturer torque specifications.
5. Reconnect the electrical connectors.