FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I fix the Ford F-150 13th Generation (2015-2020) traction control light - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/how do I fix the Ford F-150 13th Generation (2015-2020) traction control light

how do I fix the Ford F-150 13th Generation (2015-2020) traction control light

Ford F-150 13th Generation (2015-2020)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
545 words

Problem Statement

Learn how to diagnose and fix the traction control light issue in Ford F-150 (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool down if any components were previously hot.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Reduced engine power or hesitation during acceleration
  • •Unresponsive traction control system
  • •ABS light may also be illuminated
  • •Vehicle may feel unstable or have reduced traction in slippery conditions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Funnel

Parts Required

  • •Wheel speed sensor (if defective)
  • •Traction control switch (if faulty)
  • •Brake fluid (if low)

Additional Information

Affected Component
Brakes
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Inspect Wheel Speed Sensors
  • Tools Required: Socket set, multimeter.
  • Remove the wheel from the affected axle.
  • Disconnect the wheel speed sensor connector.
  • Use a multimeter to check the sensor's resistance; it should be within the manufacturer's specifications (usually between 1,000 to 2,000 ohms).
  • Clean the sensor and its mounting surface, then reconnect and reassemble the wheel.
3. Check Brake Fluid Level
  • Tools Required: Funnel, brake fluid.
  • Locate the brake fluid reservoir under the hood.
  • Verify the fluid level; if low, top it off with the manufacturer-recommended brake fluid type (usually DOT 3 or DOT 4).
  • Inspect for leaks in the brake lines or connections.
4. Inspect Traction Control Switch
  • Tools Required: Socket set.
  • Locate the traction control switch on the dashboard.
  • Remove the switch and inspect for any signs of damage or corrosion.
  • Test the switch with a multimeter; it should show continuity when pressed.
  • Replace the switch if faulty.
5. Clear Error Codes
  • Reconnect the battery.
  • Use the OBD-II scanner to clear any error codes.
  • Start the vehicle and observe if the traction control light remains off during a test drive.