how to fix Ford F-150 12th Generation (2009-2014) P0700 transmission code

Ford F-150 12th Generation (2009-2014)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

4 min read

617 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission code in Ford F-150 12th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems

Symptoms

•Check engine light illuminated
•Rough shifting or slipping during gear changes
•Unresponsive transmission or inability to shift into certain gears
•Increased engine RPM without corresponding vehicle acceleration
•Transmission overheating warning
•Poor fuel economy

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve additional transmission-related codes.
2
Inspect the transmission fluid level and condition, looking for signs of contamination or burning.
3
Check the wiring and connectors to the transmission control module (TCM) for damage or corrosion.
4
Test the TCM operation using a multimeter to ensure it is receiving and sending appropriate signals.
5
Inspect transmission solenoids for malfunction or blockage.
6
Verify that there are no mechanical issues within the transmission by checking for abnormal noises or fluid leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Transmission fluid pump

Parts Required

•Transmission fluid (Mercon LV)
•Transmission filter (if applicable)
•Transmission pan gasket
•Transmission solenoids (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve additional transmission-related codes.
2
Inspect the transmission fluid level and condition, looking for signs of contamination or burning.
3
Check the wiring and connectors to the transmission control module (TCM) for damage or corrosion.
4
Test the TCM operation using a multimeter to ensure it is receiving and sending appropriate signals.
5
Inspect transmission solenoids for malfunction or blockage.
6
Verify that there are no mechanical issues within the transmission by checking for abnormal noises or fluid leaks.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent any electrical shorts.

2. Address Transmission Fluid Issues

Sub-step 1: Check the transmission fluid level using the dipstick. If low, top off with the correct fluid type (typically Mercon LV for Ford).
Sub-step 2: If the fluid is dark or smells burnt, perform a transmission fluid change, draining the old fluid and replacing it with new fluid.
Sub-step 3: Replace the transmission filter if applicable, ensuring that the new filter is seated properly.

3. Inspect and Repair Electrical Connections

Sub-step 1: Remove the transmission control module connector. Inspect for corrosion, bent pins, or other damage.
Sub-step 2: Clean any corroded connections with electrical contact cleaner and reconnect securely.
Sub-step 3: If the wiring harness is damaged, replace it with a new harness.

4. Test and Replace Transmission Solenoids (if needed)

Sub-step 1: Remove the transmission pan to access the solenoids. Drain excess transmission fluid into a clean container.
Sub-step 2: Disconnect the solenoid connectors and remove the solenoids for testing.
Sub-step 3: Test solenoids for resistance using a multimeter. Replace any solenoids that do not meet manufacturer specifications.

5. Reassemble and Reconnect

Sub-step 1: Reinstall the transmission pan with a new gasket, torque to manufacturer specifications (typically around 10-12 ft-lbs).
Sub-step 2: Reconnect the transmission control module and battery.
Sub-step 3: Fill the transmission with the appropriate fluid level as per specifications.