FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why does my Ford Explorer 2021's dashboard flicker when I turn on the headlights? - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/Why does my Ford Explorer 2021's dashboard flicker when I turn on the headlights?

Why does my Ford Explorer 2021's dashboard flicker when I turn on the headlights?

Ford Explorer Sixth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
623 words

Problem Statement

Learn how to diagnose and fix dashboard flickering issues in the 2021 Ford Explorer when headlights are turned on. Step-by-step guide included.

Affected Component
electrical system
Estimated Time
2-4 hours

Symptoms

  • •Dashboard lights flicker when headlights are turned on.
  • •Potential dimming of other electrical components (e.g., radio, interior lights).
  • •No warning lights may be illuminated, but electrical behavior seems abnormal.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Multimeter
  • •Basic hand tools (screwdriver, wrench)
  • •Belt tension gauge (optional)
  • •OBD-II Scanner

Additional Information

Affected Component
electrical system
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem Overview

The flickering dashboard lights in a 2021 Ford Explorer when the headlights are turned on can indicate a few potential issues. This can range from electrical system problems, grounding issues, or even a failing battery or alternator. Below are the detailed steps to diagnose and resolve the issue.

Step 1: Visual Inspection

Tools Required:

  • Flashlight
  • Multimeter (optional)
  • Basic hand tools (screwdriver, wrench)

  1. Check the Battery Connections:

    • Open the hood and inspect the battery terminals for corrosion or loose connections.
    • Ensure both positive (+) and negative (-) cables are securely attached.

  2. Inspect Headlight Wiring:

    • Check the wiring harness connected to the headlights for any signs of damage or wear.
    • Ensure the connectors are firmly attached.

  3. Examine Grounding Points:

    • Locate the grounding points for the dashboard and headlights.
    • Ensure they are clean, tight, and free of corrosion.

Step 2: Check Battery Voltage

Tools Required:

  • Multimeter

  1. Measure Battery Voltage:

    • With the vehicle off, use a multimeter to measure the voltage across the battery terminals. It should read around 12.6 volts.
    • If the voltage is below 12.4 volts, consider charging the battery.

  2. Measure Voltage with Engine Running:

    • Start the vehicle and measure the voltage again. It should read between 13.7 to 14.7 volts.
    • If the voltage is below this range, the alternator may be failing.

Step 3: Inspect the Alternator

Tools Required:

  • Multimeter
  • Belt tension gauge (optional)

  1. Check Alternator Output:

    • While the engine is running, check the voltage at the alternator output terminal.
    • If the voltage is low, the alternator may need to be replaced.

  2. Listen for Unusual Noises:

    • Listen for any grinding or whining noises from the alternator which may indicate internal failure.

Step 4: Scan for Fault Codes

Tools Required:

  • OBD-II Scanner

  1. Connect the OBD-II Scanner:

    • Plug in the scanner to the OBD-II port under the dashboard.
    • Check for any stored trouble codes that may indicate electrical system issues.

  2. Interpret Codes:

    • Look specifically for codes related to the electrical system, battery, or charging circuit.
Repair Instructions

Step 1: Clean or Replace Battery Connections

  • Clean any corrosion from the battery terminals using a wire brush or battery cleaner.
  • If the terminals are damaged, replace them.

Step 2: Replace the Battery (if necessary)

  • If the battery voltage is low and does not hold a charge, replace it with a new battery suitable for the Ford Explorer.

Step 3: Repair Wiring and Grounding

  • Repair or replace any damaged wiring found during the inspection.
  • Ensure all grounding points are clean and secure.

Step 4: Replace the Alternator (if necessary)

  1. Disconnect the Battery:

    • Always disconnect the negative terminal before working on electrical components.

  2. Remove the Alternator:

    • Remove any belts connected to the alternator.
    • Disconnect the electrical connectors and unbolt the alternator from its mounting brackets.

  3. Install New Alternator:

    • Position the new alternator, secure it with bolts, and reconnect electrical connectors.
    • Reinstall the belt and ensure proper tension.

  4. Reconnect the Battery:

    • Reattach the negative battery terminal.
Conclusion

After completing these diagnostic steps and repairs, start the vehicle and check if the dashboard lights still flicker when the headlights are turned on. If the issue persists, it may be best to consult a professional technician or visit a Ford dealership for a more in-depth diagnosis.