FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I do if the check engine light comes on in my 2021 Ford Explorer? - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/What should I do if the check engine light comes on in my 2021 Ford Explorer?

What should I do if the check engine light comes on in my 2021 Ford Explorer?

Ford Explorer Sixth Generation (2020-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
602 words

Problem Statement

Learn how to diagnose and fix check engine light issues in your 2021 Ford Explorer with detailed steps, symptoms, and required tools.

Affected Component
Engine

Symptoms

  • •Check Engine Light illuminated on the dashboard
  • •Decreased fuel efficiency
  • •Rough idling or engine misfires
  • •Reduced engine power
  • •Unusual engine noises

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Basic hand tools (screwdrivers, wrenches)
  • •Torque wrench
  • •Multimeter (if applicable)

Additional Information

Affected Component
Engine
Difficulty
medium
Severity
medium
Tools Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

If the check engine light (CEL) comes on in your 2021 Ford Explorer, it’s important to diagnose the issue properly to prevent further damage to the vehicle. Below are detailed steps, including symptoms, diagnostic steps, tools required, and repair instructions.

Tools Required
  • OBD-II Scanner
  • Basic hand tools (screwdrivers, wrenches)
  • Torque wrench
  • Multimeter (if applicable)
Step-by-Step Diagnostic Process

Step 1: Scan for Codes

  1. Connect the OBD-II Scanner:

    • Locate the OBD-II port under the dashboard on the driver’s side.
    • Plug in your scanner and turn the ignition to the "On" position.

  2. Read Codes:

    • Follow the instructions on the scanner to retrieve the DTCs.
    • Note down all codes and any freeze frame data provided by the scanner.

Step 2: Research Codes

  1. Interpret Codes:
    • Use an online database or the scanner's manual to understand the codes.
    • Common codes and their meanings for the 2021 Ford Explorer might include:
      • P0420: Catalyst System Efficiency Below Threshold
      • P0300: Random/Multiple Cylinder Misfire Detected
      • P0171: System Too Lean (Bank 1)

Step 3: Visual Inspection

  1. Inspect Engine Bay:

    • Look for obvious issues like disconnected hoses, damaged wires, or leaks.
    • Check the condition of the air intake system and vacuum lines.

  2. Examine Engine Components:

    • Inspect spark plugs and ignition coils for wear.
    • Check fuel injectors for clogs or leaks.

Step 4: Perform Tests Based on Codes

  • Depending on the DTCs retrieved, perform specific tests:

    • For Misfire Codes (P0300):

      • Test ignition coils and spark plugs using a multimeter.
      • Ensure fuel pressure is within specifications.

    • For Lean Codes (P0171):

      • Inspect the mass air flow (MAF) sensor.
      • Check fuel pressure and the fuel filter.

Step 5: Clear Codes and Test Drive

  1. Clear Codes:

    • After addressing any issues, use the OBD-II scanner to clear the codes.

  2. Test Drive:

    • Take the vehicle for a test drive to see if the check engine light returns.
    • Monitor performance and listen for any irregularities.
Repair Instructions

  • Replace Faulty Components:

    • If the issue is with spark plugs, ignition coils, or MAF sensor, replace them as necessary.
    • Ensure all connections are secure and clean any electrical contacts.

  • Fix Vacuum Leaks:

    • Replace any damaged hoses or seals that may be causing a vacuum leak.

  • Catalytic Converter Issues:

    • If the catalytic converter is diagnosed as faulty, it will need to be replaced. Refer to the service manual for specific instructions on this procedure.
Final Steps

  1. Re-scan the Vehicle:

    • After repairs, re-scan the vehicle to ensure no codes are present.

  2. Monitor Performance:

    • Continue to monitor the vehicle for any symptoms or warning lights.
Conclusion

The check engine light can indicate a wide range of issues. Following these diagnostic steps will help you identify and resolve the problem effectively. If you are uncomfortable performing these steps or if the issue persists, it is recommended to seek professional assistance from a certified Ford technician.