FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford Explorer's rear window won't go down, what should I check? - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/my Ford Explorer's rear window won't go down, what should I check?

my Ford Explorer's rear window won't go down, what should I check?

Ford Explorer Sixth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
505 words

Problem Statement

Learn how to diagnose and fix the rear window issue in your Ford Explorer. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent shocks or short circuits.
  • •Use caution when handling glass components to avoid injury.

Symptoms

  • •Rear window remains fully closed
  • •Window switch does not respond when pressed
  • •No sound of the window motor engaging
  • •Possible blown fuse for the window circuit
  • •Rear window may be stuck due to a mechanical blockage

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Multimeter
  • •Fuse puller
  • •Screwdriver set

Parts Required

  • •Window motor (if faulty)
  • •Window regulator (if damaged)
  • •Replacement fuses (as needed)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle's battery to ensure safety while working on electrical components.
2. Check and Replace the Fuse
  • Locate the fuse panel (usually found under the dashboard or in the engine compartment).
  • Identify the fuse for the power windows using the diagram on the fuse panel cover.
  • Remove the fuse using a fuse puller or pliers.
  • Inspect the fuse for continuity; if blown, replace it with a fuse of the same amperage rating.
3. Access the Rear Window Motor
  • Remove the rear door panel by unscrewing any screws and carefully prying off clips.
  • Disconnect any electrical connectors attached to the door panel.
  • Lift the door panel off and set it aside to access the window motor and regulator.
4. Inspect and Replace Components
  • Check the condition of the window motor and regulator.
  • If the motor is faulty, disconnect the wiring harness and remove the mounting bolts using a socket set.
  • Install the new window motor in reverse order, ensuring all connections are secure.
  • If the regulator is damaged, replace it similarly.
5. Reassemble and Test
  • Reattach the door panel, ensuring all clips and screws are secured.
  • Reconnect the vehicle's battery.
  • Test the window switch to verify functionality.