my Ford Explorer is vibrating at high speeds what could be the issue

Ford Explorer Sixth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

450 words

Problem Statement

Learn how to diagnose and fix vibrations at high speeds in your Ford Explorer. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when lifting the vehicle.
•Wear safety goggles when inspecting and working on components.

Symptoms

•Vibration felt in the steering wheel or seat
•Increased noise from the tires or drivetrain
•Steering wheel shaking
•Uneven tire wear
•Potential pulling to one side while driving

Diagnostic Steps

1
Inspect tire condition and pressure for proper inflation.
2
Check for wheel balance issues by performing a road test or using a wheel balancer.
3
Examine suspension components for wear or damage, including struts, shocks, and bushings.
4
Inspect drivetrain components, including driveshaft, U-joints, and wheel bearings.
5
Perform an alignment check to ensure proper wheel alignment.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Wheel balancer
•Socket set
•Torque wrench
•Alignment tools

Parts Required

•Tires (if necessary)
•Wheel weights
•Suspension components (if necessary)
•U-joints (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure for proper inflation.
2
Check for wheel balance issues by performing a road test or using a wheel balancer.
3
Examine suspension components for wear or damage, including struts, shocks, and bushings.
4
Inspect drivetrain components, including driveshaft, U-joints, and wheel bearings.
5
Perform an alignment check to ensure proper wheel alignment.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a level surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Tire Inspection

Sub-steps:
- Check tire pressure with a tire gauge and inflate to manufacturer specifications.
- Inspect tires for bulges, cracks, or uneven wear.
- Replace tires if they are worn beyond tread wear indicators.

3. Wheel Balancing

Sub-steps:
- Remove the wheel and tire assembly from the vehicle.
- Use a wheel balancer to check for imbalances.
- Add wheel weights as necessary to correct imbalance.
- Reinstall the wheel and torque lug nuts to manufacturer specifications (typically 80-100 ft-lbs).

4. Suspension Component Inspection

Sub-steps:
- Visually inspect struts and shocks for leaks or damage.
- Check suspension bushings for wear or cracking.
- Replace any damaged suspension components as needed.

5. Drivetrain Inspection

Sub-steps:
- Inspect the driveshaft for dents or damage.
- Check U-joints for play or wear.
- Replace any faulty U-joints or driveshaft components.

6. Alignment Check

Sub-steps:
- Take the vehicle to a professional alignment shop.
- Have the alignment checked and adjusted to manufacturer specifications.