how to reset the oil change light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

373 words

Problem Statement

Learn how to reset the oil change light on a 2020-present Ford Explorer. Step-by-step guide to ensure your maintenance reminder is cleared.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (P) before performing the reset.

Symptoms

•Oil change light remains illuminated on the dashboard
•Maintenance reminder message displayed on the instrument panel
•Engine oil change has been performed, but the indicator has not reset

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the trip/odometer reset button on the dashboard.
3
Check the engine oil level to confirm the oil change has been performed.
4
Verify that the vehicle is in park (P) for safety during the reset process.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools required for the reset.

Parts Required

•No parts required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and in the "On" position (ignition on, engine off).
Gather necessary items:
- No special tools required for this reset.

2. Access the Oil Life Reset Function

Press the trip/odometer reset button until the display shows "Oil Life" or "Engine Oil Change."
If necessary, cycle through the menu using the reset button until the oil life percentage is displayed.

3. Reset the Oil Life

Once "Oil Life" is displayed, press and hold the trip/odometer reset button.
Continue holding the button until the oil life percentage resets to 100% (the display will show "Oil Life Reset").

4. Verification

Release the trip/odometer reset button.
Turn off the ignition and then restart the vehicle.
Check the dashboard to confirm that the oil change light is no longer illuminated.