how to reset the oil change light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

358 words

Problem Statement

Learn how to reset the oil change light on a 2020-present Ford Explorer. Step-by-step guide to ensure accurate maintenance tracking after an oil change.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe gear (Park for automatic, Neutral for manual) to prevent rolling during this process.

Symptoms

•Oil change light remains illuminated after oil change
•Maintenance reminder notification persists on the dashboard
•Difficulty in tracking the next oil change interval

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Turn the ignition off and then back on to check if the light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this procedure.

Parts Required

•None specifically required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather all necessary tools and materials.
Place the vehicle in "On" mode without starting the engine.

2. Resetting the Oil Change Light

Access the Instrument Cluster:
- Sit in the driver's seat and ensure all doors are closed.
- Insert the key and turn the ignition to the "On" position.
Accelerate the Gas Pedal:
- Fully depress the accelerator pedal three times within 10 seconds.
- Ensure that this is done quickly and without any pauses.
Turn Off Ignition:
- Turn the ignition off completely after pressing the gas pedal.
- Wait for a few seconds.
Turn Ignition Back On:
- Turn the ignition back to "On" without starting the engine.
- Check the dashboard for the oil change light. It should be off.