what causes my Ford Explorer Fifth Generation (2011-2019) to stall when accelerating

Ford Explorer Fifth Generation (2011-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

546 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine stalling during acceleration in Ford Explorer Fifth Generation (2011-2019). Step-by-step guide with diagnostic procedures.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.

Symptoms

•Engine stalls when accelerating
•Rough engine idle
•Check engine light illuminated
•Decreased engine power
•Engine misfires
•Unusual engine noises during acceleration

Diagnostic Steps

1
Scan the vehicle with an OBD-II scanner for any error codes.
2
Inspect the fuel pump operation and fuel pressure.
3
Check for vacuum leaks in the intake manifold and hoses.
4
Test the ignition system components, including spark plugs and ignition coils.
5
Inspect the mass air flow (MAF) sensor for dirt or faults.
6
Examine the throttle body for carbon buildup or malfunction.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Socket set
•Torque wrench
•Multimeter
•Throttle body cleaner
•MAF cleaner spray

Parts Required

•Fuel filter
•Spark plugs
•Ignition coils (if faulty)
•Throttle body gasket (if needed)
•MAF sensor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle with an OBD-II scanner for any error codes.
2
Inspect the fuel pump operation and fuel pressure.
3
Check for vacuum leaks in the intake manifold and hoses.
4
Test the ignition system components, including spark plugs and ignition coils.
5
Inspect the mass air flow (MAF) sensor for dirt or faults.
6
Examine the throttle body for carbon buildup or malfunction.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety.
Allow the engine to cool down before starting work.

2. Fuel System Inspection

Sub-step 1: Check fuel pump operation.
- Use a fuel pressure gauge to measure fuel pressure at the fuel rail.
- Compare readings to manufacturer specifications.
Sub-step 2: Replace fuel filter if clogged.
- Locate the fuel filter; relieve pressure before removal.
- Install the new filter ensuring the correct flow direction is followed.

3. Ignition System Repair

Sub-step 1: Inspect and replace spark plugs.
- Remove the ignition coils to access spark plugs.
- Use a socket wrench to remove old spark plugs and install new ones, torquing to manufacturer specifications.
Sub-step 2: Test and replace ignition coils if necessary.
- Use a multimeter to check for proper resistance in coils.
- Replace any faulty coils.

4. Throttle Body Cleaning

Sub-step 1: Remove the throttle body.
- Disconnect the throttle body connector and the intake hose.
- Unbolt the throttle body from the intake manifold.
Sub-step 2: Clean the throttle body.
- Use throttle body cleaner and a soft cloth to remove carbon build-up.
- Reinstall the throttle body and reattach all connectors and hoses.

5. MAF Sensor Cleaning

Sub-step 1: Remove the MAF sensor.
- Disconnect the electrical connector and unbolt the sensor from the intake.
Sub-step 2: Clean the MAF sensor.
- Use MAF cleaner spray to carefully clean the sensor element.
- Reinstall the MAF sensor, ensuring it is securely fastened.