how to reset the tire pressure light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

437 words

Problem Statement

Learn how to reset the tire pressure light on Ford Explorer (2011-2019). Step-by-step guide with diagnostic steps and safety tips included.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface when checking tire pressure to avoid inaccurate readings.

1
Verify current tire pressures using a tire pressure gauge to ensure they are within the manufacturer's recommended range.
2
Inspect all tires visually for any signs of damage or punctures.
3
Ensure the spare tire is also checked, as some systems monitor it as well.
4
Check the vehicle's owner's manual for specific instructions regarding the tire pressure monitoring system (TPMS).
5
Determine if the tire pressure light is due to a recent tire change or inflation.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Verify current tire pressures using a tire pressure gauge to ensure they are within the manufacturer's recommended range.
2
Inspect all tires visually for any signs of damage or punctures.
3
Ensure the spare tire is also checked, as some systems monitor it as well.
4
Check the vehicle's owner's manual for specific instructions regarding the tire pressure monitoring system (TPMS).
5
Determine if the tire pressure light is due to a recent tire change or inflation.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, vehicle owner's manual.
Ensure all tires, including the spare, are inflated to the recommended pressures.

2. Resetting the Tire Pressure Light

Turn on the Ignition: Insert the key and turn the ignition to the "On" position without starting the engine.
Locate the TPMS Reset Button: This button is typically located beneath the steering wheel or on the dashboard. Consult the owner's manual if necessary.
Press and Hold the TPMS Reset Button: Hold the button until the tire pressure light blinks three times, then release it.
Check for Errors: Start the engine and allow the vehicle to run for a few minutes. Observe if the tire pressure light remains off.
Drive the Vehicle: Drive the vehicle for at least 10 minutes at speeds above 20 mph. This allows the system to recalibrate.