how to reset the service light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

380 words

Problem Statement

Learn how to reset the service light on a Ford Explorer (2011-2019). Step-by-step instructions for a quick and easy reset process.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing any reset.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder message displayed
•Engine oil change notification (if applicable)
•Tire pressure monitoring system warning (if applicable)

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Check the owner's manual for specific reset instructions related to the service light.
3
Confirm that all required maintenance services have been performed prior to resetting the light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools: You will need the vehicle key or key fob.
Ensure the vehicle is parked safely and in a well-ventilated area.

2. Turn On the Ignition

Insert the key into the ignition or press the start/stop button without pressing the brake pedal to turn the ignition to the "On" position.
Wait for the dashboard lights to illuminate.

Use the steering wheel controls to navigate.
Press the "Menu" button on the steering wheel.
Use the directional arrows on the steering wheel to scroll to "Settings" or "Vehicle Settings."

4. Reset the Service Light

Navigate to "Oil Life Reset" or "Reset Service."
Select the option and follow the prompts to confirm resetting.
A confirmation message should appear indicating that the service light has been reset.

5. Turn Off the Ignition

Turn the ignition off and then back on to ensure that the service light is no longer illuminated.