how to reset the oil change light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

388 words

Problem Statement

Learn how to reset the oil change light on Ford Explorer (2011-2019) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat surface and is in the 'Park' position before performing the reset process.

Symptoms

•Oil change light remains illuminated on the dashboard
•Engine oil level may be full
•Recent oil change has been performed
•No engine performance issues present

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the key into the ignition or press the start button without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Check the display for the oil change light resetting message.
5
Turn off the ignition completely.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the key into the ignition or press the start button without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Check the display for the oil change light resetting message.
5
Turn off the ignition completely.

Solution

1. Preparation

Gather necessary tools such as the vehicle key or key fob.
Ensure the vehicle is in park mode with the engine off.

2. Ignition Sequence

Insert the key into the ignition or use the start button.
Turn the ignition to the "On" position without starting the engine. This is the position just before the engine cranks.
Wait for the dashboard lights to illuminate.

3. Resetting the Oil Change Light

With the ignition in the "On" position, press the accelerator pedal down completely three times within a span of 10 seconds.
Watch the dashboard for the oil change light to turn off or for a message confirming the reset.

4. Finalizing the Process

Turn off the ignition completely.
Start the engine to verify that the oil change light is no longer illuminated.