how to reset the oil change light on a Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

333 words

Problem Statement

Learn how to reset the oil change light on a Ford Explorer Fifth Generation (2011-2019) with this simple step-by-step guide.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and the gear is in 'Park' before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder indicating an oil change is due
•Engine oil warning light may also be present

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the gas pedal inside the vehicle.
3
Press the gas pedal three times within five seconds.
4
Confirm that the oil change light has reset by turning the ignition off and then back on.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools:
- None required for the reset process.
Ensure the vehicle is parked on a flat surface with the engine turned off.

2. Access the Ignition

Insert the key into the ignition or press the start button to set the vehicle to the "On" position without starting the engine.

3. Reset the Oil Change Light

Press the gas pedal three times quickly within five seconds.
Observe the dashboard for any indication that the oil change light has turned off.

4. Confirm Reset

Turn off the ignition completely.
Restart the vehicle to verify that the oil change light is no longer illuminated.